IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 148 / 361

HD2 IP55 High-ingress Protection Series Inverter
-134
Function
code
Name Description
Default
value Modify
P03.42
Inertia
compensation
filter times
Filter times of inertia compensation torque,
used to smooth inertia compensation torque.
Setting range: 0–10
7
○
P03.43
Inertia
identification
torque value
Due to friction force, it is required to set certain
identification torque for the inertia identification
to be performed properly.
0.0–100.0% (rated motor torque)
10.0% ○
P03.44 Enable inertia
identification
0: No operation
1: Start identification
0
◎
P03.45
Current loop
proportional
coefficient after
autotuning
Automatic update will be performed after
motor parameter autotuning. In the
closed-loop vector control mode for
synchronous motors, you can set the value of
this function code to P03.09.
Range: 0–65535
Note: Set the value to 0 if motor parameter
autotuning is not performed.
0
●
P03.46
Current integral
proportional
coefficient after
autotuning
Automatic update will be performed after
motor parameter autotuning. In the
closed-loop vector control mode for
synchronous motors, you can set the value of
this function code to P03.10.
Range: 0–65535
Note: Set the value to 0 if motor parameter
autotuning is not performed.
0 ●
P04 group––V/F control
Function
code
Name Description
Default
value Modify
P04.00 V/F curve setup
of motor 1
This group of function code defines the V/F
curve of motor 1 to satisfy different load
characteristics needs.
0: Straight V/F curve; fit for constant-torque
load
1: Multi-point V/F curve
2: Torque down V/F curve (1.3
th
order)
3: Torque down V/F curve (1.7 th order)
4: Torque down V/F curve (2.0
nd
order)
Curve 2–4 are suitable for torque-variable load
of fan pump and similar equipment. Users can
make
adjustment based on load
characteristics to achieve optimal energy-
saving effect.
5: Customized V/F (V/F separation); under
this mode, V is separated from f. Users can
0
◎
Function parameter list