IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 174 / 361

HD2 IP55 High-ingress Protection Series Inverter
-160
Function
code
Name Description
Default
value Modify
P08.15
Amplitude of
wobbling
frequency
0.0–100.0% (relative to set frequency) 0.0%
○
P08.16
Amplitude of
jump frequency
0.0–50.0% (relative to amplitude of wobbling
frequency)
0.0%
○
P08.17
Rise time of
wobbling
frequency
0.1–3600.0s 5.0s
○
P08.18
Descend time of
wobbling
frequency
0.1–3600.0s 5.0s
○
P08.19
Switching
frequency of
acceleration/de
celeration time
0.00– P00.03 (max. output frequency)
0.00Hz: no switch-over
Switch to acceleration/deceleration time 2 if
the running frequency is larger than P08.19
0.00Hz
○
P08.20
Frequency
threshold of the
start of droop
control
0.00–50.00Hz 2.00Hz ○
P08.21
Reference
frequency of
acceleration/de
celeration time
0: Max. output frequency
1: Set frequency
2: 100Hz
Note: Valid for straight
acceleration/deceleration only.
0 ◎
P08.22 Reserved / /
/
P08.23
Number of
decimal points
of frequency
0: Two decimal points
1: One decimal point
0 ○
P08.24
Number of
decimal points
of linear speed
0: No decimal point
1: One
2: Two
3: Three
0
○
P08.25 Set count value P08.26 –65535 0
○
P08.26
Designated
count value 0–
P08.25 0 ○
P08.27
Set running
time
0–65535min 0min ○
P08.28 Automatic fault
reset times
Automatic fault reset times: When the inverter
selects automatic fault reset, it is used to set
the times of automatic reset, if the continuous
reset times exceeds the value set by P08.29,
the inverter will report fault and stop to wait for
repair.
Interval of automatic fault reset: select the
interval time from when fault occurred to
0
○
P08.29
Automatic fault
reset time
interval
1.0s ○
Function parameter list