IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 196 / 361

HD2 IP55 High-ingress Protection Series Inverter
-182
Function
code
Name Description
Default
value Modify
P12.28
Power display
calibration
coefficient of
motor 2
0.00–3.00 1.00 ○
P12.29
Parameter display
of motor 2
0: Display based on the motor type; under
this mode, only parameters related to current
motor type will be displayed.
1: Display all; under this mode, all the
parameters will be displayed.
0
○
P12.30 System inertia of
motor 2
0–30.000kgm
2
0.000 ○
P12.31–
P12.32
Reserved / / /
P13 group––Control parameters of synchronous motor
Function
code
Name Description
Default
value Modify
P13.00
Reduction rate
of the injection
current of
synchronous
motor
0.0%–100.0% rated motor current 80.0%
○
P13.01
Initial pole
detection mode
0: No detection
1: High-frequency current injection
2: Pulse superimposition
0 ◎
P13.02 Pull-in current 1
Pull-in current is the pole position orientation
current; pull-in current 1 is valid within the lower
limit of pull-in current switch-over frequency
threshold. If users need to increase the starting
torque, increase the value of this function code
properly.
Setting range: 0.0%–100.0% (rated motor
current)
20.0%
○
P13.03 Pull-in current 2
Pull-in current is the pole position orientation
current; pull-in current 2 is valid within the
upper limit of pull-in current switch-over
frequency threshold, and users do not need to
change pull-in current 2 under common
situations.
Setting range: 0.0%–100.0% (rated motor
current)
10.0%
○
P13.04
Switch-over
frequency of
pull-in current
0.00Hz– P00.03 (max. output frequency) 10.00Hz
○
P13.05 High-frequency
superposition 200Hz–1000Hz
500Hz
◎