IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 60 / 361

HD2 IP55 High-ingress Protection Series Inverters Basic Operation Instructions
-48-
The running command channel can be set by terminal commands besides P00.01 and P00.02.
Current running
command channel
P00.01
Multi-function
terminal function
(36)
Command switches
to keypad
Multi-function
terminal function (37)
Command switches
to terminal
Multi-function terminal
function (38)
Command switches to
communication
Keypad / Terminal Communication
Terminal Keypad / Communication
Communication Keypad Terminal /
Note: "/" means this multi-function terminal is valid under current reference channel.
Related parameter list:
Function
code
Name Description
Default
value
P00.00 Speed control mode
0: SVC 0
1: SVC 1
2: SVM
3: VC
Note: If 0, 1 or 3 is selected, it is required to
carry out motor parameter autotuning first.
2
P00.01
Running command
channel
0: Keypad
1: Terminal
2: Communication
0
P00.02 Communication running
command channel
0: Modbus
1: PROFIBUS/CANopen/DeviceNet
2: Ethernet
3: EtherCAT/PROFINET
4: PLC programmable card
5: Bluetooth card
0
P00.15
Motor parameter
autotuning
0: No operation
1: Rotary autotuning 1; carry out
comprehensive motor parameter autotuning;
rotary autotuning is used in cases where high
control precision is required;
2: Static autotuning 1 (comprehensive
autotuning); static autotuning 1 is used in
cases where the motor cannot be
disconnected from load;
3: Static autotuning 2 (partial autotuning) ;
when current motor is motor 1, only P02.06,
P02.07 and P02.08 will be autotuned; when
current motor is motor 2, only P12.06, P12.07
and P12.08 will be autotuned.
4: Rotary autotuning 2, which is similar to
rotary autotuning 1 but is only applicable to
asynchronous motors.
5: Rotary autotuning 3 (partial autotuning),
which is only applicable to asynchronous
motors.
0