IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 151 / 361

HD2 IP55 High-ingress Protection Series
Function parameter list
-137-
Function
code
Name Description
Default
value Modify
P04.11
High-frequency
oscillation
control factor of
motor 1
frequencies, which may lead to unstable motor
operation, or even inverter overcurrent, users
can adjust these two parameters properly to
eliminate such phenomenon.
Setting range of P04.10 : 0–100
Setting range of P04.11 : 0–100
Setting range of P04.12 : 0.00Hz– P00.03
(max. output frequency)
10
○
P04.12
Oscillation
control
threshold of
motor 1
30.00Hz ○
P04.13 V/F curve setup
of motor 2
0: Straight V/F curve; 1:
Multi-point V/F curve
2: Torque-down V/F curve (1.3 th order)
3: Torque-down V/F curve (1.7
th
order)
4: Torque-down V/F curve (2.0 nd order)
5: Customize V/F (V/F separation)
0
◎
P04.14 Torque boost of
motor 2
0.0%: (automatic) 0.1%–10.0% 0.0%
○
P04.15 Motor 2 torque
boost cut-off
0.0%–50.0% (relative to rated frequency of
motor 2)
20.0% ○
P04.16
V/F frequency
point 1 of motor
2
0.00Hz– P04.18 0.00Hz
○
P04.17
V/F voltage
point 1 of motor
2
0.0%–110.0% (rated voltage of motor 2) 00.0%
○
P04.18
V/F frequency
point 2 of motor
2
P04.16 – P04.20
0.00Hz
○
P04.19
V/F voltage
point 2 of motor
2
0.0%–110.0% (rated voltage of motor 2) 00.0% ○
P04.20
V/F frequency
point 3 of motor
2
P04.18 – P12.02 (rated frequency of
asynchronous motor 2)
Or P04.18 – P12.16 (rated frequency of
synchronous motor 2)
0.00Hz ○
P04.21
V/F voltage
point 3 of motor
2
0.0%–110.0% (rated motor voltage) 00.0% ○
P04.22
V/F slip
compensation
gain of motor 2
0.0–200.0% 0.0%
○
P04.23
Low-frequency
oscillation
control factor of
motor 2
0–100 10
○
P04.24
High-frequency
oscillation
control factor of
motor 2
0–100 10 ○