IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 84 / 361

HD2 IP55 High-ingress Protection Series
Basic Operation Instructions
-72-
Function
code
Name Description
Default
value
P01.32 Pre-exciting time of jogging 0–10.000s 0.000s
P01.33
Starting frequency of
braking for jogging to stop 0–P00.03
0.00Hz
P01.34 Delay to enter sleep 0–3600.0s 0.0s
P05.01–
P05.06
Digital input function
selection
1: Forward running
2: Reverse running
4: Forward jogging
5: Reverse jogging
6: Coast to stop
7: Fault reset
8: Running pause
21: Acceleration/deceleration time
selection 1
22: Acceleration/deceleration time
selection 2
30: Acceleration/deceleration disabled
/
P08.06 Running frequency of jog 0.00Hz–P00.03 (max. output frequency) 5.00Hz
P08.07 Acceleration time at jogging 0.0–3600.0s
Depend
on model
P08.08 Deceleration time at jogging 0.0–3600.0s
Depend
on model
P08.00 Acceleration time 2 0.0–3600.0s
Depend
on model
P08.01 Declaration time 2 0.0–3600.0s
Depend
on model
P08.02
Acceleration time 3 0.0–3600.0s
Depend
on model
P08.03 Declaration time 3 0.0–3600.0s
Depend
on model
P08.04 Acceleration time 4 0.0–3600.0s
Depend
on model
P08.05 Declaration time 4 0.0–3600.0s
Depend
on model
P08.19
Switching frequency of
acceleration/deceleration
time
0.00–P00.03 (max. output frequency)
0.00Hz: No switch over
If the running frequency is larger than
P08.19, switch to acceleration
/Deceleration time 2
0
P08.21
Reference frequency of
acceleration/deceleration
time
0: Max. output frequency
1: Set frequency
2: 100Hz
Note: Valid for straight-line
acceleration/deceleration only
0
P08.28 Automatic fault reset times 0–10 0
P08.29
Automatic fault reset time
interval
0.1–3600.0s
1.0s