IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 43 / 361

HD2 IP55 High-ingress Protection Series Inverters Basic Operation Instructions
-31-
No. Name Instruction
with interfaces, eg switch over the
monitoring interface, eg shifting the cursor
leftward, exiting current menu and
returning to previous menu, etc;
RIGHT: The function of RIGHT key varies
with interfaces, eg switch over the
monitoring interface, shifting the cursor
rightward, enter the next menu etc.
3 Display
area
(12) LCD Display screen
240×160 dot-matrix LCD; display three
monitoring parameters or six sub-menu
items simultaneously
4 Others
(13)
RJ45
interface RJ45 interface
RJ45 interface is used to connect to the
inverter.
(14)
Battery
holder
Clock battery
holder
The battery holder is used for replacing or
installing a battery for the clock.
(15)
USB
terminal
mini USB
terminal
Mini USB terminal is used to connect to
the USB flash drive through an adapter.
The LCD has different display areas, which displays different contents under different
interfaces. The figure below is the main interface of stop state.
Figure 5-2 Main interface of LCD
A B C
D
E
F
Area Name Displayed contents
Header A Real-time display
area
Display the real-time; clock battery is not included; the time
needs to be reset when powering on the inverter
Header B inverter running
state display
area
Display the running state of the inverter:
1. Display motor rotating direction: "Forward" – Run
forward during operation; Reverse – Run reversely
during operation; "Forbid" – Reverse running is
disabled;
2. Display inverter running command channel:
"Local"– Keypad; "Terminal"–Terminal;
"Remote"– Communication
3. Display current running state of the inverter : "Ready" –
The
16:02:35 Forward Local Ready 01: HD2IP
Set frequency
P17.00 Hz
50.00
DC bus voltage
P17.11 V
540.0
Digital input terminal state
P17.12
0x0000
Monitoring About
Menu