IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 132 / 361

HD2 IP55 High-ingress Protection Series Inverter
-118
Function
code
Name Description
Default
value Modify
autotuning); static autotuning 1 is used in cases
where the motor cannot be disconnected from
load;
3: Static autotuning 2 (partial autotuning) ; when
current motor is motor 1, only P02.06 , P02.07
and P02.08 will be autotuned; when current
motor is motor 2, only P12.06 , P12.07 and
P12.08 will be autotuned.
4: Rotary autotuning 2, which is similar to rotary
autotuning 1 but is only applicable to
asynchronous motors.
5: Rotary autotuning 3 (partial autotuning), which
is only applicable to asynchronous
motors.
P00.16 AVR function
0: Invalid
1: Valid during the whole process
Automatic voltage regulation function is used to
eliminate the impact on the output voltage of
inverter when bus voltage fluctuates.
1
○
P00.17 Inverter Mode 0: CT Mode
1: VT Mode
P00.18
Function
parameter
Reset
0: No operation
1: Restore to default value
2: Clear fault history
Note: After the selected function operations is
completed, this function code will be restored to
0 automatically. Restoring to default value will
clear the user password, so this function should
be used with caution.
0
◎
P01 group––Start/Stop control
Function
code
Name Description
Default
value Modify
P01.00
Running
mode at start
0: Direct start
1: Start after DC brake
2: Start after speed-tracking 1
3: Start after speed-tracking 2
0
◎
P01.01
Starting
frequency of
direct start
Starting frequency of direct startup is the initial
frequency when the inverter starts. See P01.02
(hold time of starting frequency) for details.
Setting range: 0.00–50.00Hz
0.50Hz ◎
Function parameter list