IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 206 / 361

HD2 IP55 High-ingress Protection Series Inverter
-192
Function
code
Name Description
Default
value Modify
P18.10
Current position
when spindle
stops
accurately
Current position when spindle stops
accurately.
Range: 0–65535
0 ●
P18.11
Encoder Z
pulse direction
Z pulse direction display. When the spindle
stops accurately, there may be a couple of
pulses’ error between the position of forward
and reverse orientation, which can be
eliminated by adjusting Z pulse direction of
P20.02 or exchanging phase AB of encoder.
0: Forward
1: Reverse
0
●
P18.12
Encoder Z
pulse angle
Reserved.
Range: 0.00–359.99
0.00 ●
P18.13
Encoder Z
pulse error
times
Reserved.
Range: 0–65535
0
●
P18.14
High bit of
encoder pulse
count value
0–65535 0 ●
P18.15
Low bit of
encoder pulse
count value
0–65535 0
●
P18.16
Main control
board
measured
speed value
-3276.8–3276.7Hz
0.0Hz
●
P18.17
Pulse command
frequency
Pulse command (A2, B2 terminal) is converted
to the set frequency, and it is valid under pulse
position mode and pulse speed mode.
Range: 0–655.35Hz
0.00Hz
●
P18.18
Pulse command
feedforward
Pulse command (A2, B2 terminal) is converted
to the set frequency, and it is valid under pulse
position mode and pulse speed mode.
Range: 0–655.35Hz
0.00Hz
●
P18.19
Position
regulator output -327.68–327.67Hz
0.00Hz
●
P18.20 Count value of
resolver
Count value of resolver.
Range: 0–65535
0 ●
P18.21 Resolver angle
The pole position angle read according to the
resolver-type encoder.
Range: 0.00–359.99
0.00
●
P18.22
Pole angle of
closed-loop
synchronous
motor
Current pole position.
Range: 0.00–359.99
0.00 ●