IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 24 / 361

HD2 IP55 High-ingress Protection Series
Installation Guide
-14-
Environment Condition
Running
environment
The installation site should meet the following requirements.

Away from electromagnetic radiation sources;

Away from oil mist, corrosive gases and combustible gases;

Ensure foreign object like metal powder will not fall into the inverter (do
not install the inverter onto combustible object like wood);

Away from radioactive substance and combustible objects;

Away from corrosive liquid;

Low salt content;

No direct sunlight
Altitude

Below 1000m;

When the installation site altitude exceeds 1000m, derate 1% for every
increase of 100m; when the installation site altitude exceeds
3000m, consult the local IMO dealer or office.
Vibration Up to 5.8m/s 2 (0.6g)
Installation
direction Install the inverter vertically to ensure good heat dissipation effect.
Note: inverters must be installed in ventilated environments free of corrosive gases and
conductive dust.
4.2.2 Installation direction
The inverter can be installed on the wall or in a cabinet.
The inverter must be installed vertically. Check the installation position according to
following requirements. See Appendix C "Dimension drawings" for detailed outline dimensions.
Figure 4-1 Installation direction of the inverter
OK
a. Vertical installation
NO
b.Horizontal installation
NO
c.Transverse installation