IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 147 / 361

HD2 IP55 High-ingress Protection Series
Function parameter list
-133-
Function
code
Name Description
Default
value Modify
P03.31
Corresponding
frequency of
high speed
friction torque
P03.29 –400.00Hz 50.00Hz
○
P03.32 Torque control
enable
0:Disable
1:Enable
0 ◎
P03.33 Flux weakening
integral gain 0–8000
1200 ○
P03.34 Reserved / /
/
P03.35
Control
optimization
setting
0–0x1111
Ones place: Torque command selection
0: Torque reference
1: Torque current reference
Tens place: Reserved
0: Reserved
1: Reserved
Hundreds place: Whether to enable ASR
integral separation
0: Disable
1: Enable
Thousands place: Reserved
0: Reserved
1: Reserved
0x0000 ○
P03.36
Speed loop
differential gain 0.00–10.00s
0.00s
○
P03.37
High-frequency
current loop
proportional
coefficient
Under closed-loop vector control mode
( P00.00 =3) and P03.39 , the current loop PI
parameters are P03.09 and P03.10 ; above
P03.39 , the PI parameters are P03.37 and
P03.38 .
Setting range of P03.37 : 0–65535
Setting range of P03.38 : 0–65535
Setting range of P03.39 : 0.0–100.0% (relative
to max. frequency)
1000
○
P03.38
High-frequency
current loop
integral
coefficient
1000 ○
P03.39
Current loop
high-frequency
switch-over
point
100.0% ○
P03.40
Inertia
compensation
enable
0: Disable
1: Enable
0 ○
P03.41
Upper limit of
inertia
compensation
torque
Limit the max. inertia compensation torque to
prevent inertia compensation torque from
being too large.
Setting range: 0.0–150.0% (rated motor
torque)
10.0%
○