IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 229 / 361

HD2 IP55 High-ingress Protection Series Inverter
Function parameter list
-209-
Function
code
Name Description
Default
value Modify
P26.36
AO3 output
selection
0
○
P26.37 Reserved / /
P26.38 Lower limit of
AO2 output
Above function codes define the relation
between output value and analog output.
When the output value exceeds the set
max./min. output range, the upper/low limit of
output will be adopted during calculation.
When analog output is current output, 1mA
corresponds to 0.5V voltage. In different
applications, 100% of output value
corresponds to different analog outputs.
10V (20mA)
AO
0.0% 100.0%
Setting range of P26.38 : -300.0%– P26.40
Setting range of P26.39 : 0.00V–10.00V
Setting range of P26.40 : P26.38 –100.0%
Setting range of P26.41 : 0.00V–10.00V
Setting range of P26.42 : 0.000s–10.000s
Setting range of P26.43 : -300.0%– P26.45
Setting range of P26.44 : 0.00V–10.00V
Setting range of P26.45 : P26.43 –300.0%
Setting range of P26.46 : 0.00V–10.00V
Setting range of P26.47 : 0.000s–10.000s
0.0%
○
P26.39
Corresponding
AO2 output of
lower limit
0.00V
○
P26.40 Upper limit of
AO2 output
100.0%
○
P26.41
Corresponding
AO2 output of
upper limit
10.00V ○
P26.42 AO2 output filter
time
0.000s ○
P26.43 Lower limit of
AO3 output
0.0% ○
P26.44
Corresponding
AO3 output of
lower limit
0.00V
○
P26.45 Upper limit of
AO3 output
100.0%
○
P26.46
Corresponding
AO3 output of
upper limit
10.00V
○
P26.47
AO3 output filter
time
0.000s ○
P26.48–
P26.52
Reserved / / /
P28 group––Master/slave control functions
Function
code
Name Description
Default
value Modify
P28.00 Master/slave
mode selection
0: The master/slave control is invalid
1: This machine is a master
2: This machine is a slave
0
◎
P28.01
Master/slave
communication
data selection
0: CAN
1: Reserved
0 ◎
P28.02 Master/slave
control mode
Ones: Master/slave running mode selection
0: Master/slave mode 0
(The master and slave adopt speed control
0x001 ◎