IMO HD2 IP Series, Инструкция по эксплуатации

Страница: 29 / 361

HD2 IP55 High-ingress Protection Series inverter
Installation Guide
-19-
HD2IP-92A-43 and above
4.3 Standard wiring of main circuit
4.3.1 Wiring diagram of main circuit
Figure 4-7 Main circuit wiring diagram
Note:
1. The fuse, DC reactor, brake unit, brake resistor, input reactor, input filter, output reactor and
output filter are optional parts. See Appendix D "Optional peripheral accessories" for details.
2. When connecting the brake resistor, take off the yellow warning sign marked with PB, (+)
and (-) on the terminal block before connecting the brake resistor wire, otherwise, poor
contact may occur.
HD2IP-75A-43 and below