Husqvarna F2303Q0, Руководство по ремонту

Страница: 216 / 322

17 ENGINE
Thrust surface, clutch facing discs in outer clutch
hub
If the thrust surface exhibits excessive wear:
:S 0.5 mm (:S 0.02 in)
-
Change the clutch facing discs and the clutch basket.
-
Check needle bearing � and collar bushing
4D
for damage and wear.
If there is damage or wear:
-
Change the needle bearing and collar bushing.
-
Check clutch facing discs
48
for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
-
Check the thickness of the clutch disc pack.
Clutch disc pack - thickness
Wear limit ;;;: 26.4 mm (<:: 1.039 in)
If the clutch disc pack does not meet specifications:
-
Change the clutch disc pack.
-
Check intermediate clutch discs G) for damage and wear.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
17.4.39 Checking the shift mechanism
-
Check shift forks
O
on plate
f)
for damage and wear (visual check).
If there is damage or wear:
-
Change the shift fork.
-
Check shift grooves
0
of shift drum
8
for wear.
If the shift groove is worn:
-
Change the shift drum.
-
Check the seat of shift drum in bearing Ci).
214
311600-10