Husqvarna F2303Q0, Руководство по ремонту

Страница: 157 / 322

I
BRAKE SYSTEM 16
Main work
- Stand the vehicle upright.
- Remove screw cap
O
with membrane f!} and the O-ring.
- Add brake fluid to level f).
I
Brake fluid DOT 4 / DOT 5.1 ( 8 p. 290)
- Mount and tighten the screw cap with the membrane and O­
ring.
• Info
I
Clean up overflowed or spilled brake fluid immediately
with water.
Changing the rear brake fluid
Warning
Skin irritation Brake fluid causes skin irritation.
- Keep brake fluid out of the reach of children.
- Wear suitable protective clothing and safety glasses.
- Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
- Consult a doctor immediately if brake fluid has been swallowed.
- Rinse the affected area with plenty of water in the event of contact with the skin.
...
- Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
- If brake fluid spills on to your clothing, change the clothing.
Note
Environmental hazard Hazardous substances cause environmental damage.
- Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance
with the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
- Cover painted parts.
- Remove screw cap
O
with the membrane and the O-ring.
Extract the old brake fluid from the brake fluid reservoir using
a syringe and fill with fresh brake fluid.
Syringe (50329050000) ( 8 p. 296)
Brake fluid DOT 4 / DOT 5.1 ( 8 p. 290)
155