Husqvarna F2303Q0, Руководство по ремонту

Страница: 215 / 322

17 .4.38 Checking the clutch
- Check clutch throw-out
O
for damage and wear.
If there is damage or wear:
- Change the clutch push rod.
- Place the clutch push rod
8
on a flat surface and check for run-out.
If there is run-out:
- Change the clutch push rod.
- Check the length of clutch springs (5).
306625-10
I Clutch spring - length
I
45.60 ... 46.80 mm (1. 7953 ... 1 .8425 in)
If the clutch spring length is shorter than specified:
- Change all clutch springs.
- Check the contact surface of clutch pressure cap
8
for damage and wear.
If there is damage or wear:
- Change the clutch pressure cap.
- Check inside inner clutch hub
0
for damage and wear.
If there is damage or wear:
- Change the inside inner clutch hub.
- Check sleeves (3 for damage and wear.
If there is damage or wear:
- Change the sleeves.
- Check outside inner clutch hub @ for damage and wear.
If there is damage or wear:
- Change the outside inner clutch hub.
- Check washer
fD
for damage and wear.
If there is damage or wear:
- Change the washer.
- Check the thrust surfaces of the clutch facing discs in clutch basket
@)
for wear.
ENGINE 17
213