Honda NSA700A DN-1 2009, Руководство по обслуживанию

Страница: 435 / 654

FINAL DRIVE
Replace the pinion gear shim w ith a thicker one if
the contact pattern i3 too high, tow ard the focc.
Too High
*
FACE FACE
DRIVE
SIDE
COAST
SIDE
Replace the pinion gear shim w ith a thinner one if
the contact pattern is too ow, tow ard the flank.
The patterns w ill shift about 1.5 - 2.0 mm (0.06 -
0.08 in) when the thickness of the shim is changed
by 0.1 mm (0.004 in).
Too Low:
PINION GEAR
A: 1.32 mm (0.
B: 1.38 mm (0.
C: 1.44 mm (0.
D: 1.50 mm (0.
E: 1.56 mm (0.
F: 1.62 mm (0
G: 1.68 mm (0.
SHIMS:
052 in)
054 in)
057 in)
059 in)
061 in)
064 in)
066 in)
DRIVE
FLANK SIDE
For pinion gear shim replacement, separate the final
gear case (page 14-15).
COAST T
SIDE
FLANK
RING GEAR REMOVAL/SHIM
REPLACEMENT
Remove the final gear case cover (page 14-10).
Press the ring gear out of the gear case cover using
the special tools and hydraulic press.
TOOLS:
O il s e a l d riv e r, 5 5 .7 x 6 0 .3 m m 0 7 9 6 5 -K E 8 0 2 0 0
Remove the oil seal.
DRIVER
ATTAC H M EN T