Honda NSA700A DN-1 2009, Руководство по обслуживанию

Страница: 420 / 654

CRANKCASE/CRANKSHAFT
In case of main bearing replacement only:
MAIN JOURNAL O.U.
52 988 - 52.994 nm
(2.0861-2.0864 n| 52.982 - 52 988 mm
(2.0859 - 2 0861 in) 52.976 - 52.982 mm
(2.0857 - 20859 in) 52.970 - 52.976 mm
(2.0654 - 2.0857 in)
BEARING 58.058-58.070 mm O.S. F
O.S. E O.S. E O.S. E
SUPPORT I.D.
(2.2857 - 2.2862 in) (Pink) (Yellow) (Yellow) (Yellow)
58.046 - 58.058 mm
O.S. G
O.S. F
O.S. F O.S. E
(2.2853 - 2.2857 in)
(Red) (Pink) (Pink) (Yellow)
58.034 - 58.046 mm A
O.S. G O.S. G O.S. F
(2.2848 - 2.2853 in) (Blue) (Red)
(Red)
(Pink)
58.022-58.034 mm B A
A O.S. G
(2.2843 - 2.2848 in) (Black) (Blue) (Blue) (Red)
58.016 - 58.022 mm C B A A
(2.2841 -2.28 4 3 in)
(Brownl
(Black) (Blue) (Blue)
58.010-58.016 mm
D
C B A
(2.2839-2.2841 in)
(Green) (Brown) (Black) (Blue)
BEARING THICKNESS:
O.S. E (Yellow): Thick
O.S. F (Pink):
O.S. G (Red):
A (Blue): Middle
B (Black):
C (Brown): ^
D (Green): Thin
BEARING INSTALLATION
Apply engine oil to new bearing surface.
Set new bearings to the metal installer aligning its side edge w ith the
metal installer grooves.
TOOL:
M etal installer set 070MF-MEG0200
Assemble the metal installer and tighten the socket bolts to the speci­
fied torque.
TORQUE: 23 N-m (2.3 kgf-m, 17 Ib fft)
Set the bearings and specia tools assembly on inside of the crankcase,
fittin g the bearing edge in the crankcase main journal.
A lign the mating line of the bearings w ith the index mark on the crank­
case as shown.
IDENTIFICATION COLOR
SOCKET BOLTS
BEARING
METAL
INSTALLER
BEARING
13-14