ESI ESI2000, Руководство по эксплуатации

Страница: 14 / 272

6
ESI Operation Manual
Connecting to a Mixer
Main Outputs: The ESI has provisions for a variety of output connec-
tion schemes. The most common hookup is probably using the main
stereo outputs. Output level is -10 dBm (approximately 1-2 volts RMS).
Output impedance is 1K ohm.
Submix Outputs/Mix In: In addition to the main stereo outputs, the
ESI has an additional pair of submix outputs which can be used when
individual processing on specific instruments is desired. Any combina-
tion of channels can be programmed to appear at the submix output
pair. Any keyboard zone (key range) can also be assigned to the submix
pair using the Output Channel function in the Dynamic Processing
module. MIDI channels can be assigned to the submix pair using the
Multimode Mix function in the Master/Global module.
✱
Tip: Inserting a standard mono plug
halfway into either of the sub output jacks
allows you to sum into the main outputs
without a special cable. This is a handy
feature for those times when you run out of
mixer channels.
The Submix Outputs are stereo jacks with -10 dBm outputs on the tip of
the jack. Output impedance is 1K ohm. The ring of each submix jack is
a return input to the main outputs. By using a special cable shown
above, specific presets or MIDI channels can be externally processed and
then returned to the main mix.
Stereo Headphone Output: The headphone output is located on the left
side of the front panel and is capable of driving all types of stereo
headphones. The output level is controlled by the master volume
control.
Turbo Option Outputs: The optional Turbo card contains three addi-
tional output channel pairs: FX, Sub 2 and Sub 3. The stereo outputs are
accessed using a stereo plug adapter cable. The FX output is a duplicate
of the main outputs run through the effects processors. When MIDI
channels or Zones are programmed to “Main,” they appear at both the
FX and Main outputs. Submix outputs 2 and 3 incorporate “plug
sensing” which reroutes signals to the FX outputs if a plug is not in-
serted into the submix jack.
✱
Tip: The submix outputs use a “plug
sensing” scheme which re-routes the signal
to the main outputs if a plug is not inserted.
Sub Output
Return
(To Main Output)
Tip Ring
To Effect From Effect
SEND/RETURN CABLES