ESI ESI2000 Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 272

ESI ESI2000 Скачать руководство пользователя страница 71

Master/Global

63

3. Erase Disk Bank

With this utility, banks can be erased from any of the available drives.

1. Activate Master/Global module.

2. Select Disk Utilities (7), Erase Bank (3).

3. If you wish to select a different drive, press the up cursor. If not,

proceed to step 5.

4. Select the drive containing the bank to be erased, then press

ENTER.

ERASE DISK BANK
D1 QUANTUM LP1055
B01 12 String
Select a Drive

5. Select the bank to be erased, then press ENTER.

ERASE DISK BANK

D1 QUANTUM LP1055
B01 12 String
Select a Bank

6. Decide if in fact you want to erase the selected bank.

The display

will ask if you’re sure.

7. Press Yes to erase the bank or No to cancel the operation.

In

either case, the ESI will return to the Module Identifier.

4. Lock Bank and Drive

If you don’t want to risk curious hands unintentionally erasing a bank or
drive, here’s a safeguard. A complete drive or any bank within that drive
can be locked against inadvertent erasure or tampering, and subse-
quently unlocked as needed.

1. Activate Master/Global module.

2. Select Disk Utilities (7), Lock Bank/Drive (4).

3. If you want to lock a drive or change the current drive, press the

up cursor button.

If not, go on to step 6. The display will show the

current drive and its lock status, whether on or off.

LOCK DRIVE: off
D1 Current Drive

Select a Drive

!

Caution:

The display will advise you if

you try to erase a bank or drive that is
locked. Unlock the bank or drive before
proceeding.

!

Caution:

When using multiple ESI's on

the SCSI bus, the bank will only be locked
when accessed from the ESI that locked it.
Any other ESI on the bus can still erase the
bank.

This function will not let you lock a floppy
disk. To lock a floppy, open the write-protect
window on the disk.

«
...
69
70
71
72
73
...
»

Содержание ESI2000

















































































































































































































































































Отзывы:

Нет отзывов