ESI ESI2000, Руководство по эксплуатации

Страница: 81 / 272

Master/Global
73
Output Boost digitally raises the output level by +12 dB and is related
to the headroom control. The +12 dB boost provides the best signal-to-
noise ratio when only one or two channels are being played at a time.
However, playing back too many channels with the output boosted may
cause the output signal to clip. The Headroom control can be used to
reduce the effect of Output Boost. (0 dB of headroom = maximum
boost.) Output Boost affects both the analog and digital outputs.
1. Press the Master/Global key.
2. Select Special (8), Headroom/Boost (3) .
HEADROOM/BOOST
Headroom: 2 dB
Output Boost: 0 dB
3. Set the Output Boost to +12 dB .
4. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
4. Main Output Format
The optional Turbo card adds a digital audio output for interfacing with
other digital audio gear. The digital audio interface carries two channels
of audio information which duplicates the audio at the main outputs.
Both the analog and digital outputs are always active. Set the format to
optimize the ESI's output for whatever format is being used. The Output
format can be optimized for AES pro, AES consumer (S/PDIF) or
analog output.
1. Activate Master/Global module.
2. Select Special (8), Output Format (4).
OUTPUT FORMAT
Format: analog
Select Output Format
3. Set the Output to the format you are using.
4. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
!
Caution: Be sure to set Main Output
Format correctly for the type of output you
are using or degraded audio performance
could result.