ESI ESI2000, Руководство по эксплуатации, Страница: 163 / 272

Digital Processing
155
The Sonic Enhancer adds brilliance and “cut” to a sample, making it
stand out in a mix. This effect is especially effective on vocal samples to
which it adds sheen, clarity and presence. The Sonic Enhancer works by
generating new harmonics related to the source material.
The parameters are as follows:
• Amount: Sets the intensity of the effect. Lower values (<40%) tend
to work best as they keep the effect subtle.
• Tune: Sets the frequency range of the effect, variable from 0-9.
Higher numbers emphasize higher frequencies.
• Fade In: Sets the amount of time from the start point for the effect
to fade in to the programmed amount.
• Fade Out: Sets the amount of time before the end point that it will
take for the effect amount to fade out to zero.
þ
To Enhance a Sample:
1. Press the Digital Processing key .
2. Select Digital Tools II (8), Sonic Enhancer (8).
3. If the current sample is stereo, the following screen appears. Select
the left side, right side, or both sides (stereo), then press Enter .
Otherwise proceed to the next step.
SONIC ENHANCER
Side: Stereo
Select L/R/Stereo
4. Select the section of the sample to be processed, then press
Enter. The display shows the current endpoints, which are the
endpoints of the sample.
ENHANCE secs samples
Start: 0.00 00000
End: 0.58 25745
Size: 0.58 25745
SONIC ENHANCER
Amount: 40%
Tune: 9
FadeIn:000 Out:000ms
8. Sonic
Enhancer