ESI ESI2000, Руководство по эксплуатации

Страница: 117 / 272

Preset Management
109
Individual presets, with or without their samples, can be erased from the
bank loaded into the ESI to free up memory space.
1. Activate Preset Management module.
2. Select Submodule Erase Preset (3).
3. Select the preset to be erased, then press ENTER.
ERASE PRESET
P00 Current Preset
Select a Preset
4. Press Yes to erase the preset, or No to cancel the operation. If
the preset you are erasing contains samples unique to this preset,
you will be asked if you want to Erase Samples Also? Enter Yes to
erase the unique samples, or No to erase the preset. In either case
the ESI will return to the Module Identifier.
Presets can be copied to other preset numbers within the same bank.
This is useful if you want to create variations on a particular preset. For
example, you may want to alter the MIDI, velocity, or Dynamic Process-
ing parameters.
1. Activate Preset Management module.
2. Select Copy Preset (4).
3. Select the preset to be copied, then press ENTER.
COPY PRESET from
P00 Current Preset
Select Source Preset
4. Select the destination preset number into which the source
preset will be copied, then press ENTER. If you try to overwrite
an existing preset, you will be asked to verify that's what you want
to do. Press Yes to replace the existing sample, or No to cancel the
operation.
COPY PRESET into
P00 Selected Preset
P01 Empty Preset
Select Dest Preset
3. Erase
Preset
4. Copy
Preset
✱
Tip: Copying a preset will not make
copies of the samples used in the preset.
✱
Tip: Erasing a preset won't necessarily
free up memory. The samples may be used
in other presets which are not erased.