ESI ESI2000, Руководство по эксплуатации

Страница: 94 / 272

86
ESI Operation Manual
Akai Mini-Glossary
Partition = Akai hard disks are divided into partitions of 30, 40, 50,
or 60 megabytes, unlike the ESI which sees the hard disk as
one continuous area.
Volume = An Akai partition can contain up to 128 Volumes. A
volume is a collection of programs, equivalent to an ESI
bank. Volumes are limited to a total of 64 sample, “program”
and “drum setting” files.
Program = Equivalent to an ESI Preset.
Akai Load
7. Press 2 to select the Akai Load/Convert screen. Immediately after
Load/Convert is selected, the ESI will attempt to read and verify the
Akai disk using Search mode or using the SCSI ID selected in the
SCSI Setup screen. If Search mode was selected, the following screen
will appear:
AKAI LOAD
Searching...
If an Akai disk cannot be found, an error message will be generated
indicating: “No Akai Drive Found”. If a valid Akai device is found, the
following screen will appear:
AKAI LOAD from
P:A Vol:PIANOS
Select Partition
8. Use the INC & DEC buttons to select the Partition number,
then use the right cursor button to move to the next parameter
(or press ENTER).
“P” stands for Partition. Akai partitions are indicated by letters A-Z. The
first volume in the partition is displayed next to the partition letter.
9. Use the INC & DEC buttons or the Data Entry Control to select
the Volume. When the desired Volume is located, press ENTER or
use the right cursor button to move on to the next screen.
AKAI LOAD from
P:A Vol:PIANOS
Select Volume
✱
Tip: The cursor buttons can be used to
go back to the previous field.