ESI ESI2000, Руководство по эксплуатации

Страница: 187 / 272

Preset Definition
179
8. For Velocity Ranges, select Velocity Range as the Crossfade-
Switch parameter and press ENTER. Next, select the velocity
ranges in the Preset Definition module, Vel Switch Pt/Link (6).
• Crosswitch between the Primary and Secondary Layers
In this example, the Primary layer plays when the key velocity is below
96 and the Secondary layer plays when the key velocity is 96 or greater.
1. Press the Preset Definition key.
2. Select Crossfade Switch (5).
3. Select the lowest key of the zone to be crossfaded or switched,
then press ENTER . The default is to the lowest note of the lowest
sample. You can select a different low key in two ways. The Data
Entry Control scrolls through the lowest key of each sample on the
keyboard. The Data Entry Control is the fastest selection method if
you want the lowest key of the zone to coincide with the lowest note
of a sample. Or, you can use the keyboard to specify any note as the
lowest note of the zone.
CROSSFADE/SWITCH
P00 C1
Select Low Key
The second line shows the note being played on the keyboard (or
scrolled with the Data Entry Control). After selecting a note, the first line
displays the zone’s crossfade status, the third line displays the primary
sample number, and the fourth line displays the secondary sample
number associated with the note on line two.
4. Select the highest key of the zone to be crossfaded or switched,
then press ENTER . The ESI defaults to the highest note of the
sample that contains the previously specified low note. You can
select a different high key in two ways. The
Data Entry Control
scrolls through the highest key of each sample on the keyboard. The
Data Entry Control is the fastest selection method if you want the
highest key of the zone to coincide with the highest note of a
sample. Or, you can use the keyboard to specify any note as the
highest note of the zone.
Pri
0 16 32 48 64 80 96 112 127
Velocity
Sec