ESI ESI2000, Руководство по эксплуатации

Страница: 191 / 272

Preset Definition
183
This submodule contains two completely unrelated functions.
• The velocity cross-switch function in the Preset Definition, Crossfade/
Switch submodule (5) allows overlapping samples to be switched
according to key velocity. The Velocity Switch portion of this module
sets the velocity at which samples are cross-switched.
• The current preset can be linked with another preset, allowing you to
place multiple presets on each key of the keyboard. As an example,
suppose you link preset 001 to preset 002 and that preset 002 has
previously been linked to preset 008. When preset 001 is played, presets
002 and 008 will play as well. When preset 002 is played, preset 008
will also play. The polyphony of the ESI will vary according to the voice
architecture of each preset in the stack. If two presets are linked to
themselves, forming a loop, those two presets will play in unison up to
the channel limit of the ESI.
1. Activate Preset Definition module.
2. Select Vel Switch Pt/Link (6).
3. Use the Data Entry Control to select the velocity at which
samples will be cross-switched. Values range from 1 to 127.
VEL SWITCH/PT LINK
Vel Switch Point: 64
Link Preset to:
Pxx Off
4. Move the cursor down one line and use the Data Entry Control
to choose the preset (or none) that will be linked to the current
preset.
5. Press the Right Cursor key. The following screen appears.
VEL SWITCH PT/LINK
Velocity Ranges:
Pri: 65 to 96
Sec: 97 to 127
6. Set the Velocity Ranges and press ENTER.
After pressing ENTER, the ESI returns to the Module Identifier.
6. Velocity
Switch/
Preset Link