ESI ESI2000, Руководство по эксплуатации

Страница: 106 / 272

98
ESI Operation Manual
Samples can be copied to other sample numbers within the same bank.
1. Activate Sample Management module.
2. Select Submodule 4.
3. Select the sample to be copied, then press ENTER.
COPY SAMPLE from
001 Current Sample
Select Source Sample
4. Select the destination sample number into which the source
sample will be copied, then press ENTER. If you try to overwrite
an existing sample, you will be asked if you do want to overwrite.
Press Yes to replace the existing sample, or No to cancel the opera-
tion.
COPY SAMPLE to
001 Selected Sample
001 Empty Sample
Select Dest Sample
5. Rename the sample. Choose the characters to be changed with the
right and left cursor buttons. Select the desired characters by using
the ten key pad, Data Entry Control and keyboard. You can also use
the up cursor to insert spaces and the down cursor to delete spaces.
6. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
4. Copy
Sample
✱
Tip:
Use the Copy Sample function
(Sample Management, 5) to paste the
clipboard contents to an empty sample
location.