ESI ESI2000, Руководство по эксплуатации

Страница: 82 / 272

74
ESI Operation Manual
5. Software Version
1. Activate Master/Global module.
2. Select Special (8), Software Version (5).
SOFTWARE VERSION
ESI
©1997 E-mu Systems
Version 3.00
3. The display shows the disk software version.
4. Press the right cursor key to view the credits. The names of the
ESI design team are listed, thank-you very much.
5. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
6. View Channel Levels
This is a channel monitor screen which enables you to see the volume
envelope status of all 64 voice channels. This is a useful feature when
you are playing back complex sequences and want to know how many
channels you have left.
1. Activate Master/Global module.
2. Select Special (8), View Channels (6).
3. Use the left/right cursor buttons to place the cursor under the
channel to be disabled.
VIEW CHANNEL LEVELS
4. Press Escape to exit the submodule. The ESI will return to the
Module Identifier.
7. Trigger Buttons
This function lets you assign the ten-key pad buttons to trigger specific
notes directly from the ten key pad, whenever trigger mode is selected
from the front panel button. When the mode is set to latch, pressing a
key toggles that note on. Pressing the same key again will toggle the note
off. This mode is useful when you want to trigger a looped sample (such
as background ambience) and have it continue playing without having
to hold the key. The trigger buttons operate on the current preset and
their settings are saved with the bank.
✱
Tip: See also, Trigger Mode, in the
Controls chapter of this manual.
!
Caution: Pressing 3 or more buttons
MAY cause one or more "unpressed" buttons
to play.