ESI ESI2000, Руководство по эксплуатации

Страница: 216 / 272

208
ESI Operation Manual
• Env Mode: chooses between gate mode or trigger mode. In gate
mode, the AHDSR envelopes react as described earlier. Holding
down a key cycles through the AHDS stages, and releasing initiates
the Release phase. In trigger mode, pressing a key, however briefly,
cycles through the AHR stages and ignores the decay and sustain
phases. Trigger mode is usually the best mode to use when
triggering the ESI from external drum pads.
• Solo: provides the playing action of a monophonic synthesizer with
single triggering and last-note priority. Solo mode produces more
realistic effects when working with monophonic instrument sounds
such as solo trumpet, flute, or sax, since this mode does not allow
you to play a chord.
• Nontranspose: lets a sample play throughout its assigned zone at its
original pitch only—there will be no transposition. This is useful
when determining the original note at which a sample was recorded.
Nontranspose is also useful if you’re playing drum parts from the
keyboard. Assigning a drum sound to a range consisting of several
keys provides an easier target than being forced to hit a single key.
4. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
This function lets you to exempt specific realtime control destinations
within a zone from being affected by the realtime controls. Off prevents
the realtime control destination from being affected by the realtime
controls. On (the default) allows the destinations to be affected by the
realtime controls.
Example: Suppose you wanted the pitch wheel to bend only the upper
half of the keyboard and not the lower half. Simply select the lower half
of the keyboard as the current zone and turn Pitch Off in this screen.
That's it!
1. Activate Dynamic Processing module.
2. Select Realtime Enable (8).
3. Move the cursor to the parameter(s) to be adjusted, and select
On or Off with the Data Entry Control. The first page reads:
CONTROLLERS ENABLE
Pitch: on
VCF Cutoff: on
VCF NoteOn Q: on
4. Select page two by pressing the right cursor button. The second
page controls the following realtime control destinations:
8. Realtime
Control
Enable
✱
Tip: Although the ESI version 3.00 is
different from version 2.10 in that it is more
"legato" in its envelope following, you can
get a totally “un-legato” solo mode using
one of the Mono Channel assignments.
Mono Channel assignments always preserve
the attack, even with the unlooped samples .