ESI ESI2000, Руководство по эксплуатации

Страница: 104 / 272

96
ESI Operation Manual
6. Select the sample to be loaded, then press ENTER. As you scroll
through the samples, the display shows the names of the existing
samples, whether stereo or mono, sampling rate, and sample length.
LOAD SAMPLE from
001 Current Sample
Stereo 44100Hz
3.0secs
7. Select the destination sample number into which the source
sample will be loaded, then press ENTER. If you try to overwrite
an existing sample, you will be asked if you do want to overwrite.
Enter Yes to replace the existing sample, No to cancel the operation.
LOAD SAMPLE into
001 Selected Sample
000 Empty Sample
Select Dest Sample
8. If desired, rename the sample. The Rename Sample screen auto-
matically appears. Choose the characters to be changed with the left
and right cursor buttons
. Select the desired characters by using the
ten key pad, Data Entry Control and keyboard. You can also use the
up cursor to insert spaces and the down cursor to delete spaces. (See
Sample Management, Rename Sample (2).)
9. Press ENTER to exit the submodule. The ESI will return to the
Module Identifier.
This submodule allows you to rename any sample.
1. Activate Sample Management module.
2. Select Rename Sample (2).
3. Scroll through the samples available for renaming, then press
ENTER.
RENAME SAMPLE
001 Current Sample
Select a Sample
4. Rename the sample. Choose the characters to be changed with the
right and left cursor buttons. Select the desired characters by using
the ten key pad, Data Entry Control and keyboard. You can also use
the up cursor to insert spaces and the down cursor to delete spaces.
✱
Tip:
Use the data entry knob or
increment/decrement buttons to access the
full character set. Most keyboards do not
have enough keys to access all available
characters.
See the character chart on page 241 for a
complete listing of characters.
2. Rename
Sample