ESI ESI2000, Руководство по эксплуатации

Страница: 238 / 272

230
ESI Operation Manual
The Effect parameters allow you to control the most important aspects of
the effect. The parameters for the “A” effects are: Decay Time, High
Frequency Damping and Effect B through Effect A. The parameters for
the “B” effects are: Feedback, LFO Rate and Decay Time.
The effects parameters are located in both the Master and Preset Defini-
tion menus. The settings used depend on whether you are using Preset
Effects or Master Effects. In the following descriptions we will assume
you are using the Preset Effects.
Decay Time
This parameter sets the length of time it will take an effect to fade away.
In the case of reverb, decay time controls the room size and the
reflectivity of the room. On a delay effect, decay time controls how many
echoes are produced or how long the echoes will last.
1. Press the Preset Definition key . The LED illuminates and the
Preset Definition menu appears.
2. Select Effects (9). The main Effect screen appears.
3. Select Preset Effect A (0). The following screen appears.
PRESET EFFECT A
Effect:
Hall 2
4. Select one of the effects using the Data Entry Control or INC/
DEC keys.
5. Press the Right Cursor key . The Effect Parameters screen appears.
PRESET EFFECT A
Decay Time: 56
HF Damping: 80
FxB==>FxA: 0
6. Adjust the Decay Time as desired.
7. Press the Preset Definition key to return to the main menu.
?
Note: If the Preset Effects settings are
currently selected, a pop up warning screen
will inform you of this fact and ask if you
wish to switch to Master effects.
Effect
Parameters