ESI ESI2000, Руководство по эксплуатации, Страница: 31 / 272

Controls
23
4. Use a MIDI footswitch to advance through the presets.
5. Use a MIDI program change command. Presets 000-127 can be
accessed via a MIDI program change command. Presets 128-255 can
be accessed using a MIDI bank select command, followed by a
program change.
See the MIDI Implementation Chart in the Appendix.
To see the current preset number at any time, de-activate any active
module and look at the display.
A bank consists of presets and samples. The Load function loads this
data into the ESI's memory bank from the floppy disk, hard disk or
other external SCSI device.
1. Press Load.
2. If necessary, select the drive containing the bank to be loaded.
The ESI defaults to the current drive. If you want to choose a
different drive, place the cursor under the drive number in line two,
select the appropriate drive and press ENTER.
LOAD BANK from
D1 Internal HD
Select a Bank
3. Select the bank number that contains the bank to be loaded,
then press ENTER. The display will say: Loading Bank. After a few
seconds, the bank will be loaded. The display will revert to the
preset selection screen.
A bank consists of presets and samples. The Save function saves this data
from the ESI's memory bank to the floppy disk, hard disk or other
external SCSI device.
1. Press Save.
2. If necessary, select the drive to which the bank will be saved.
The ESI saves the bank to the current drive by default. If you want
to choose a different drive, place the cursor under the drive number
in line two, select the appropriate drive and press ENTER.
SAVE BANK into
D1 Internal HD
Select a Drive
3. Select the number to which the bank will be saved, then press
ENTER. The approximate size of the bank will be displayed on line
four. Empty banks are indicated as such, along with their bank
number on line three. Or, you can overwrite an existing bank.
Save Bank
Load Bank