Maintenance 6. Maintenance Parts Replacement Procedures
RC620 Rev.8
185
Memory
(Faster)
Installation
(1) Refer to the photo and insert a new
memory slowly into the slot on CPU
board.
Do not apply too much force on the
memory, otherwise the connector area will
be broken.
(2) Push the memory connector into the slot all the way.
(3) Slowly lay flat the memory until it is
firmly secured with latches.
When the memory is laid flat, the
latches automatically catch and secure
the memory.
(4) Mount the CPU board.
Refer to
Maintenance: 6.4.2.1 CPU Board (Faster)
.
(5) Plug in the power connector. Turn ON the Controller and make sure that the
Controller starts properly without any vibration or abnormal noise.
NOTE
NOTE
Содержание RC620 CU
