Maintenance 6. Maintenance Parts Replacement Procedures
RC620 Rev.8
195
(5) Connect the Cable No. (6) with the
Switching Power Supply (ATX).
Refer to
Maintenance:
3.2
Diagram of Cable Connections
.
(6) Hold the back panel as shown in the
photo and secure the plate for
EMERGENCY connector and R-I/O
connector using 2 screws.
(7) Mount the back panel to the Controller using 4 screws.
(8)
If COM panel is mounted:
Secure the COM panel using 2 screws.
(9) Place the top panel and secure it using 10 screws.
(10) Plug in the power connector. Turn ON the Controller and make sure that the
Controller starts properly without any vibration or abnormal noise.
Содержание RC620 CU
