Maintenance 6. Maintenance Parts Replacement Procedures
178
RC620 Rev.8
BIOS
Backup Battery
(Faster)
Installation
(1) Insert the battery diagonally into the battery holder.
The battery has front and back sides. When inserting the battery, make sure
that “+” mark of the battery is visible.
(2) Make sure that the battery is firmly inserted in the holder and mount the CPU board
on the Controller.
Refer to
Maintenance: 6.4.2.1 CPU Board (Faster)
.
(3) Connect the following items to the Controller.
Keyboard
Mouse
Display
Power plug
Connect the keyboard with PS/2 port of the CPU board.
If you use the USB keyboard, connect it with PS/2 port using PS/2 branch cable
(attached to the Controller).
(4) Turn ON the Controller power and keep pressing the <Delete> key.
BIOS window will be displayed.
NOTE
NOTE
Содержание RC620 CU
