DITECH Packet Voice Processor, Руководство по управлению

Страница: 99 / 175

Media Provisioning
250-0800-06, Version A 65
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
6
Media
Provision
ing
Packet Voice Processor Commands Manual
6.3.1 LAG ROUTE Commands
The LAG ROUTE commands are used to provision, modify, or display static
routes. Table 6-4 displays the Link Aggregation Group Route commands. Each of the
Link Aggregation Group Route commands in this table are discussed in detail in
Chapter 10 on page 113 .
LAG < <lag-index> PORT ADD
<avl-media-port> [<red-role>] Command that adds a port to a LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.18 on page 148 .
LAG <lag-index> PORT <media-
port> DEL Command that removes a port from a LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.19 on page 148 .
LAG <lag-index> QOS-REPORT
[HIST <bin>] [SHOW] Command that generates an Experience Intelligence™ (EXi)
report for the LAG interface.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.20 on page 148 .
Table 6-4 LAG ROUTE Commands
Command Description
LAG ROUTE [SHOW] Command that displays all static routes in the LAG routing table.
The required minimum access level is READ for this command
(see
Section 10.6.21, “LAG ROUTE [SHOW] Command”, on
page 150 ).
LAG ROUTE ADD Command that adds a static entry to the LAG routing table. The
required minimum access level is WRITE for this command (see
Section 10.6.22, “LAG ROUTE ADD Command”, on page 151 ).
LAG ROUTE DEFAULT [SHOW] Command that shows the default route in the LAG routing table.
The required minimum access level is READ for this command
(see
Section 10.6.23, “LAG ROUTE DEFAULT [SHOW]
Command”, on page 151 ).
LAG ROUTE DEFAULT SET
[<gateway-ip-addr>] Command that modifies the default route in the LAG routing table.
The required minimum access level is WRITE for this command
(see
Section 10.6.24, “LAG ROUTE DEFAULT SET [<gateway-
ip-addr>] Command”, on page 151 ).
LAG ROUTE <route-index>
[SHOW] Command that shows static entry in the LAG routing table. The
required minimum access level is READ for this command (see
Section 10.6.25, “LAG ROUTE <route-index> [SHOW]
Command”, on page 152
).
LAG ROUTE <route-index> SET Command that modifies a static entry in the LAG routing table.
The required minimum access level is WRITE for this command
(see
Section 10.6.26, “LAG ROUTE <route-index> SET
Command”, on page 152 ).
LAG ROUTE <route-index> DEL Command that removes a static entry from the LAG routing table.
The required minimum access level is WRITE for this command
(see
Section 10.6.27, “LAG ROUTE <route-index> DEL
Command”, on page 152 ).
Table 6-3 Link Aggregation Group Commands (Continued)
Command Description