DITECH Packet Voice Processor, Руководство по управлению

Страница: 173 / 175

System Commands
250-0800-06, Version A 139
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
10
System
Co
mma
nds
Packet Voice Processor Commands Manual
10.6.4 LAG [SHOW] Command
The LAG [SHOW] command displays LAG (link aggregation group) information. The
required minimum access level is Read for this command. The command syntax is
as follows:
LAG [SHOW]
Entering the LAG [SHOW] command without an argument displays all LAGs with
their configurations (LAG name, keys, LACP mode, maximum number of ports for the
LAG, and currently configured Gigabit Ethernet ports). Example 10-24 displays an
example of this command and output.
Example 10-24 LAG [SHOW] Command
PVP> LAG SHOW
LAG KEY MODE MAXPORTS PORTS
Lag/1 1 Static N/A GigE/6/1, GigE/6/2
Entering the LAG [SHOW] command with its LAG index number displays the
configuration for that specific LAG. Example 10-25 displays an example of this
command and output.
Example 10-25 LAG [SHOW] Command
PVP> LAG 1 SHOW
LACP Mode - [Static],Dynamic
Key - [111]
MAC Address - [0:d0:2:10:2:24]
Next Hop Device IP (for link redundancy) - [10.62.1.1]
LAG IPs:
Name Address Mask Min UDP Port Max UDP Port
1 10.62.1.209 255.255.255.0 10000 14000
LAG Ports:
Name State Role
GigE/4/1 Standby Master
GigE/4/2 Standby Master
GigE/4/3 Active Backup
GigE/4/4 Active Backup
GigE/6/1 Standby Master
GigE/6/2 Standby Master
GigE/6/3 Active Backup
GigE/6/4 Active Backup