DITECH Packet Voice Processor, Руководство по управлению

Страница: 82 / 175

48 250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
Signaling Provisioning
Packet Voice Processor Commands Manual
5.3 Profile
Provisioning
Commands Table 5-1 displays the commands used for profile provisioning.
Table 5-1 Profile Provisioning Commands
Command
Description
SIGNALING [SHOW] Command that displays all configured signaling profiles
and policies.
The required minimum access level is READ for this
command. For additional information, see
Section 13.5.1
on page 219 .
SIGNALING PROFILE [SHOW] Command that lists the configured signaling profiles.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.2
on page 219 .
SIGNALING PROFILE ADD Command that adds a signaling profile.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.3
on page 220 .
SIGNALING PROFILE STATS [SHOW] Command that displays SIP protocol statistics.
The required minimum access level is READ for this
command. For additional information, see
Section 13.5.4
on page 223 .
SIGNALING PROFILE STATS CLR Command that clears SIP protocol statistics.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.5
on page 224 .
SIGNALING PROFILE <profile-name>
[SHOW] Command that displays a signaling profile.
The required minimum access level is READ for this
command. For additional information, see
Section 13.5.6
on page 224 .
SIGNALING PROFILE <profile-name> SET Command that modifies a signaling profile.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.7
on page 225 .
SIGNALING PROFILE <profile-name> DEL Command that deletes a signaling profile.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.8
on page 226 .
SIGNALING PROFILE <profile-name>
ENABLE Command that enables a signaling profile.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.9
on page 226 .
SIGNALING PROFILE <profile-name>
DISABLE Command that disables a signaling profile.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.5.10 on page 226 .
SIGNALING PROFILE <profile-name>
ROUTE [SHOW] Command that lists the routes for a signaling profile.
The required minimum access level is READ for this
command. For additional information, see
Section 13.6.1
on page 227 .
SIGNALING PROFILE <profile-name>
ROUTE ADD Command that adds a route to the signaling protocol.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.6.2
on page 227 .