DITECH Packet Voice Processor, Руководство по управлению

Страница: 98 / 175

64 250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
Media Provisioning
Packet Voice Processor Commands Manual
6.3 LAG
Commands Table 6-3 displays the Packet Voice Processor Link Aggregation Group (LAG)
commands. Each of the Link Aggregation commands in this table are discussed in
detail in Chapter 10 on page 113 .
Table 6-3 Link Aggregation Group Commands
Command Description
LAG [SHOW] Command that displays the system LAG information.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.4 on page 139 .
LAG ADD Command that adds a new LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.5 on page 141 .
LAG PING [<interval>] [<pattern>]
[<packetsize>] <pinghost> Command that sends a Ping on the LAG interface. The required
minimum access level is READ for this command (see
Section 10.6.6, “LAG PING”, on page 141 ).
LAG ARP [SHOW] Command that shows the ARP cache of the LAG interface. The
required minimum access level is READ for this command (see
Section 10.6.7, “LAG ARP [SHOW]”, on page 142 ).
LAG <lag-index> [SHOW] Command that displays LAG interface information.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.8 on page 142 .
LAG <lag-index> SET Command that sets the LAG interface configuration.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.9 on page 143 .
LAG <lag-index> STATS [SHOW] Command that displays the LAG interface statistics.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.10 on page 144 .
LAG <lag-index> STATS CLR Command that clears the LAG interface statistics.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.11 on page 145 .
LAG <lag-index> DEL Command that removes a LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.12 on page 145 .
LAG <lag-index> IP [SHOW] Command that shows the LAG IP information.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.13 on page 145 .
LAG <lag-index> IP ADD Command that adds an IP address to a LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.14 on page 146 .
LAG <lag-index> IP <ip-index>
DEL Command that removes an IP address from a LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.15 on page 147 .
LAG <lag-index> PORT [SHOW] Command that shows the LAG PORT information.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.16 on page 147 .
LAG <lag-index> PORT ADD Command that adds a port to a LAG interface.
The required minimum access level is WRITE for this command.
For additional information, see
Section 10.6.17 on page 147 .