DITECH Packet Voice Processor, Руководство по управлению

Страница: 172 / 175

138 250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
System Commands
Packet Voice Processor Commands Manual
10.6.3.1 LAG ROUTE Commands
Table 10-13 displays the Link Aggregation Group Route commands. The LAG
ROUTE commands are used to provision, modify, or display static routes.
LAG <lag-index> PORT ADD
<media-port> [<red-role>] Command that adds a port to a LAG interface. The required
minimum access level is WRITE for this command (see
Section 10.6.18, “LAG <lag-index> PORT ADD <avl-media-port>
[red-role] Command”, on page 148
).
LAG <lag-index> PORT <media-
port> DEL Command that removes a port from a LAG interface. The required
minimum access level is WRITE for this command (see
Section 10.6.19, “LAG <lag-index> PORT <media-port> DEL
Command”, on page 148
).
LAG <lag-index> QOS-REPORT
[HIST <bin>] [SHOW] Command that generates an EXi report for the LAG interface.
The required minimum access level is READ for this command.
For additional information, see
Section 10.6.19 on page 148 .
Table 10-13 LAG ROUTE Commands
Command Description
LAG ROUTE [SHOW] Command that displays all static routes in the LAG routing table. The
required minimum access level is READ for this command (see
Section 10.6.21, “LAG ROUTE [SHOW] Command”, on page 150 ).
LAG ROUTE ADD Command that adds a static entry (static route) to the Packet Voice
Processor LAG routing table. The Packet Voice Processor LAG
routing table uses the entry as an egress point.
The required minimum access level is WRITE for this command (see
Section 10.6.22, “LAG ROUTE ADD Command”, on page 151 ).
LAG ROUTE DEFAULT [SHOW] Command that shows the default route in the LAG routing table. The
required minimum access level is READ for this command (see
Section 10.6.23, “LAG ROUTE DEFAULT [SHOW] Command”, on
page 151
).
LAG ROUTE DEFAULT SET
[<gateway-ip-addr>] Command that modifies the default route in the LAG routing table.
The required minimum access level is WRITE for this command (see
Section 10.6.24, “LAG ROUTE DEFAULT SET [<gateway-ip-addr>]
Command”, on page 151
).
LAG ROUTE <route-index>
[SHOW] Command that shows static entry in the LAG routing table. The
required minimum access level is READ for this command (see
Section 10.6.25, “LAG ROUTE <route-index> [SHOW] Command”,
on page 152
).
LAG ROUTE <route-index> SET Command that modifies a static entry in the LAG routing table. The
required minimum access level is WRITE for this command (see
Section 10.6.26, “LAG ROUTE <route-index> SET Command”, on
page 152
).
LAG ROUTE <route-index> DEL Command that removes a static entry from the LAG routing table.
The required minimum access level is WRITE for this command (see
Section 10.6.27, “LAG ROUTE <route-index> DEL Command”, on
page 152
).
Table 10-12 Link Aggregation Group Commands (Continued)
Command Description