DITECH Packet Voice Processor, Руководство по управлению

Страница: 171 / 175

System Commands
250-0800-06, Version A 137
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
10
System
Co
mma
nds
Packet Voice Processor Commands Manual
10.6.3 LAG Commands
Table 10-12 displays the Packet Voice Processor Link Aggregation Group
commands.
Table 10-12 Link Aggregation Group Commands
Command Description
LAG [SHOW] Command that displays the system LAG information. The
required minimum access level is READ for this command (see
Section 10.6.4, “LAG [SHOW] Command”, on page 139 ).
LAG ADD Command that adds a new LAG interface. The required minimum
access level is WRITE for this command (see
Section 10.6.5,
“LAG ADD Command”, on page 141 ).
LAG PING [<interval>] [<pattern>]
[<packetsize>] <pinghost> Command that sends a Ping on the LAG interface. The required
minimum access level is READ for this command (see
Section 10.6.6, “LAG PING”, on page 141 ).
LAG ARP Command that shows the ARP cache of the LAG interface. The
required minimum access level is READ for this command (see
Section 10.6.7, “LAG ARP [SHOW]”, on page 142 ).
LAG <lag-index> [SHOW] Command that displays LAG interface information. The required
minimum access level is READ for this command (see
Section 10.6.8, “LAG <lag-index> [SHOW] Command”, on
page 142
).
LAG <lag-index> SET Command that provisions the LAG interface configuration. The
required minimum access level is WRITE for this command (see
Section 10.6.9, “LAG <lag-index> SET Command”, on page 143 ).
LAG <lag-index> STATS [SHOW] Command that displays the LAG interface statistics. The required
minimum access level is READ for this command (see
Section 10.6.10, “LAG <lag-index> STATS [SHOW] Command”,
on page 144
).
LAG <lag-index> STATS CLR Command that clears the LAG interface statistics. The required
minimum access level is WRITE for this command (see
Section 10.6.11, “LAG <lag-index> STATS CLR Command”, on
page 145
).
LAG <lag-index> DEL Command that removes a LAG interface. The required minimum
access level is WRITE for this command (see
Section 10.6.12,
“LAG <lag-index> DEL Command”, on page 145 ).
LAG <lag-index> IP [SHOW] Command that shows the LAG IP information. The required
minimum access level is READ for this command (see
Section 10.6.13, “LAG <lag-index> IP [SHOW] Command”, on
page 145
).
LAG <lag-index> IP ADD Command that adds an IP address to a LAG interface. The
required minimum access level is WRITE for this command (see
Section 10.6.14, “LAG <lag-index> IP ADD Command”, on
page 146
).
LAG <lag-index> IP <ip-index>
DEL Command that removes an IP address from a LAG interface. The
required minimum access level is WRITE for this command (see
Section 10.6.15, “LAG <lag-index> IP <ip-name> DEL
Command”, on page 147
).
LAG <lag-index> PORT [SHOW] Command that shows the LAG PORT information. The required
minimum access level is READ for this command (see
Section 10.6.16, “LAG <lag-interface> PORT [SHOW]
Command”, on page 147
).
LAG <lag-index> PORT ADD Command that adds a port to a LAG interface. The required
minimum access level is WRITE for this command (see
Section 10.6.17, “LAG <lag-index> PORT ADD Command”, on
page 147
)