DITECH Packet Voice Processor, Руководство по управлению

Страница: 72 / 175

38 250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
Interface Provisioning
Packet Voice Processor Commands Manual
Table 3-3 displays the commands used for provisioning the Packet Voice Processor
OOB signaling port on the Switch Control card (SCC).
Table 3-3 OOB Signaling Port Provisioning Commands
Command Description
INTERFACE <sig-port> [SHOW] Display signaling interface information.
The required minimum access level is READ for this
command. For additional command information, see
Section 10.4.1 on page 121 .
INTERFACE <sig-port> SET Set signaling interface configuration.
The required minimum access level is WRITE for this
command. For additional command information, see
Section 10.4.2 on page 123 .
INTERFACE <sig-port> SET <admin-state> Set signaling interface administrative state
The required minimum access level is WRITE for this
command. For additional command information, see
Section 10.4.3 on page 123 .
INTERFACE <sig-port> IP ADD Add an IP address to the signaling interface.
The required minimum access level is WRITE for this
command. For additional command information, see
Section 10.4.4 on page 123 .
INTERFACE <sig-port> IP <sigip-index>
DEL Delete an IP address from the signaling interface.
The required minimum access level is WRITE for this
command. For additional command information, see
Section 10.4.5 on page 124 .
INTERFACE <sig-port> IP <ip-addr> DEL Delete an IP address from the signaling interface.
The required minimum access level is WRITE for this
command. For additional command information, see
Section 10.4.6 on page 124 .
INTERFACE <sig-port> IP [SHOW] Display all IP addresses on the signaling interface.
The required minimum access level is WRITE for this
command. For additional command information, see
Section 10.4.7 on page 124 .
INTERFACE <sig-port> STATS [SHOW] Show signaling interface statistics.
The required minimum access level is READ for this
command. For additional command information, see
Section 10.4.8 on page 126 .
INTERFACE <sig-port> PING [<interval>]
[<pattern>] [<packetsize>] <pinghost> Sends Ping on the signaling interface.
The required minimum access level is READ for this
command. For additional information see
Section 10.4.9
on page 128 .
INTERFACE <sig-port> ARP [SHOW] Shows the ARP cache on signaling interface.
The required minimum access level is READ for this
command. For additional information, see
Section 10.4.10 on page 129 .