DITECH Packet Voice Processor, Руководство по управлению

Страница: 90 / 175

56 250-0800-06, Version A
D I T E C H N E T W O R K S
w w w . d i t e c h n e t w o r k s . c o m
Signaling Provisioning
Packet Voice Processor Commands Manual
Note The Packet Voice Processor supports transcoding G.711 A-Law or G.711µ-law voice
codecs to any of the voice codecs listed above. For additional transcoding
information, see
Appendix B on page 391 .
5.4.3 Policy Commands
Table 5-6 displays the commands used for provisioning policies.
G.726 G726_40
G726_32
G726_24
G726_16
G726_40_AAL2
G726_32_AAL2
G726_24_AAL2
G726_16_AAL2
EVRC EVRC Rev 0
iLBC iLBC
Table 5-5 PVP Supported Codecs (Continued)
Codec Codec Types
Table 5-6 Policy Commands
Command
Description
SIGNALING POLICY [SHOW] Command that lists the signaling policy or policies.
The required minimum access level is READ for this
command. For additional information, see
Section 13.7.2 on page 232 .
SIGNALING POLICY ADD Command that adds a signaling policy.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.7.3 on page 232 .
SIGNALING POLICY <policy-name>
[SHOW] Command that displays the signaling policy.
The required minimum access level is READ for this
command. For additional information, see
Section 13.7.4 on page 240 .
SIGNALING POLICY <policy-name> SET Command that modifies the signaling policy.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.7.5 on page 241 .
SIGNALING POLICY <policy-name> DEL Command that deletes the signaling policy.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.7.6 on page 241 .
SIGNALING POLICY <policy-name>
ENABLE Command that enables a signaling policy.
The required minimum access level is WRITE for this
command. For additional information, see
Section 13.7.7 on page 242 .