install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
2.5.3 Keyer Windows on the Multi-View
The Multi-View shows the contents and status of all 6 keyers. Just as with source
monitors, a keyer monitor displays the thumbnail of the content that is currently loaded
into the keyer as well as the device name, content name and tally status for both ME 1
and ME 2 Program/Preview. Similar to the source monitors, each individual keyer window
can be independently positioned and sized.
Modifiers applied to a Key are also shown on the Multi-View in the keyer windows. The
Key transition rate is displayed to the right of the key transition button, and if a keyer has
a DVE, Crop or a Reposition applied to it, the indicator light to the left of the device name
turns to red from grey and indicates what modifiers are active in the mini-display above
the thumbnail.
Transitioning Keys individually with the Multi-View
To Manually Bring a Key On Program
:
1.
Any key that is off-air (grey or orange), can be brought on-air by clicking on its keyer
thumbnail on the Multi-View. This will cause this key to fade on-air at the rate for that
keyer, and the tally underneath will change color to red.
To Manually Take a Key Off Program:
1.
Any key that is on-air (red), can be taken off-air by by clicking on its thumbnail on the
Multi-View. This will cause this key to fade off-air at the rate for that keyer, and the tally
underneath will change color to red (or orange if its key transition button is on).
2.5.3
Key Transition Buttons:
shows you which keyer
will be effected in the
next transition when
illuminated
ME1 Tally: Preview (Orange)
ME2 Tally: Program (Red)
What device is
assigned to each keyer
The name of the
content currently
selected in the device
Thumbnail
Key Rate &
Key modifiers