install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
6.2.1 To Select a Clip by Name
1.
Press the
[Clips]
Button if it is not already illuminated.
2.
Select the desired clip by name by pressing its PixButton in the PixPad. In the
example above, to select the “02 Light Swipe” clip, press the
[Clip 1 Light
Swipe]
PixButton, and it will illuminate. The selected clip will appear on the Multi-
View in its source window as well as on the PixPad where it will change from
grey to orange (red if the Clip Store is on air) and its name will appear
in the
display and in the Clip PixButton in the program row.
3.
Push the
[>]
motion button, it will turn orange, the clip will start to play and its
time code will be in the the display as well as the Multi-View.
6.2.2 To Select a Clip by Number
1.
Press the
[Clips]
Button if it is not already illuminated
2.
On the Clip Store PixPad, press the
[Controls]
PixButton, which will bring up the
clip controls PixPad, then press the
[Numeric Keypad]
PixButton, and it will
bring up the numeric keypad PixPad, as shown below.
3.
Enter the clip
[Number]
you wish using the numeric keypad. As you enter each
number it will appear in the display.
4.
Press the
[Enter]
PixButton and the selected clip will appear on the Multi-View,
its name will appear in the display, and its time code will be shown. The PixPad
will change to the Library containing the selected clip, which will be illuminated.
5.
Push the
[>]
motion button, and it will turn orange and
the
clip will start to play, and its time code will advance.
6.2.1
NOTE:
To select a clip by number, the clip file name must have digits in front of the name, i.e. “02 Open”.