install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
8.9
To control a remote system with a SoftPanel:
1.
Open a web browser, like Internet Explorer,
on a remote computer, as described in
section 8.6.
2.
In the address bar, enter the external IP
address
of the remote Broadcast Pix system.
In most causes this is not the assigned IP
address on the workstation NIC card. If the
external IP address is not known, on the
Broadcast Pix workstation go to
www.whatsmyip.com.
Your IP address will be displayed in the web
browser, for example 67.152.12.226.
Enter that IP address followed by the Web
Server Port number assigned, for example:
http://67.152.12.226:26000
It is important to add the colon : between the
IP address and Web Server Port.
This will open a 1ME SoftPanel.
To open a 2ME SoftPanel enter:
http://67.152.12.226:26000/softpanel2me.html
6.
Click on
return
on the keyboard to launch the
SoftPanel in the web browser.
7.
If at any time the SoftPanel loses connection
to the main workstation, the words
Reconnect
will appear in the upper right
hand corner of the SoftPanel. When the main
workstation is back up and connected to a
show, clicking on Reconnect will join the
show.