install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
5.9.9
Using Timer Action Buttons:
1.
When a Timer (Countdown or Stopwatch) is
assigned to a TagName, Action Buttons for each
Timer is automatically added to the beginning of
the Action Panel, as shown on the right.
2.
Unlike the user Action Buttons, the Timer Action
Buttons are multi-functional.
To start running a Timer click on the
Action Button
,
is will illuminate green, as shown on the right.
To pause a Timer click on the
Action
button again, it
will now illuminate orange, as shown on the right.
3.
To add or subtract seconds to the Timer, click on the
(–)
or
(+)
buttons.
4.
To reset the Timer to the start time assigned in the
Data Panel, click on the
Reset
button and the Action
button will illuminate blue.
5.
To modify the running Timer, you may access the
Data Panel by
right-clicking
on the Action Button to
automatically open the properties in the Data Panel.
5.9.9 Project Files
All the settings described may be saved into one project file, which will remember the
content, data configuration and Action Button assignments. This makes for easy switching
between different productions with different content. If no project file is saved, Rapid CG
will remember the last state at application shutdown and will reload it at the next opening.
To Save a Project:
1.
Click on the
Fluent RapidCG
menu, as
Drop down menu will appear.
2.
Click on
Project
, followed by
Save
Project As…
, as shown on the right.
3.
A Windows Explorer window will appear,
name
the file and click on the
Save
button.
4.
To load the project file, click on
Load Project…
in the above menu and select a file in the Explorer window.