install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
Changing Transitions Rates with the Rates Button
A final way to modify the transitions is with the Rates Device button in Device
Control-B. The Rates button provides a shortcut to access transitions rates for both
M/Es and all 6 Keyers.
To change the transitions rate with the Rates button:
1.
In Device Control-B, select the
[Rates]
device
button, it will illuminate
orange and the PixPad will display the available options, as shown below.
2.
To adjust the transition rate in ME 1, press the
[ME 1 Trans]
PixButton, the
PixPad will change to a numeric pad, similar to the previous section.
3.
Enter the rate
[Number]
you wish using the numeric keypad. As you enter
each number it will appear in the display.
4.
Press the
[Enter]
PixButton and the rate will appear in the display.
5.
To return to the Rates PixPad, select the
[Rates]
device button.
6.
To adjust a Key transition rate, as described in section 4.4.7, select the
desired
[Key Rate]
PixButton instead on the ME 1 Trans button, and repeat
step 3-5.
4.3.3