install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
Key
1
BGR
Key
2
Key
3
Changing a Key without a Background Change:
To add or subtract key layers without changing the background video, repeat all of
the above steps, except in step one, turn off the
[BGR]
button, as shown below.
When [BGR] is turned off, the end state of the transition will be shown on the preview
monitor, which will include the same background as currently on program.
4.4.5 Pro Transition Mode
When the background and key layers are selected in the transition section of the
control panel, by default, the buttons/layers are added/selected one at a time leaving
the previously selected layers enabled. For most users this method is acceptable,
however in some cases where rapid execution is necessary, users may prefer to only
have the selected layer active, disabling the previously select layers. This mode is
known as Pro Transition Mode.
4.4.5
Key
4
Key
5
Key
6
To enable Pro Transition Mode:
1.
In BPswitcher, select the
Panel
drop down menu.
2.
Then select
Panel Settings.
3.
Place a check next to
Pro
transition mode
, as shown on the
right.
Now, any transition layer that is
selected will automatically turn off
any previously select layers.
4.
To disable Pro transition mode,
repeat the steps above.