install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V8.5
3.7.1 Switcher Sources Assignments
Each show can have unique switcher source assignments. To change them:
1. On the Show Settings window, click on the
Switcher
Sources
button. The Switcher source assignments
window will open showing all 32 mapable input sources.
2.
Select the source number you wish to
change by clicking on its
name
. A drop
down menu will appear with all your
available source names, created in
either the Slate I/O or Router
Assignments menus, in addition to all
the internal clip and graphic channels.
3.
Select the desired
name
to map to the
control panel.
4.
Click on
OK
when complete.
3.7.1
NOTE:
These settings do not take effect until you Save the show in PixMaster, as shown in section 3.3.